RCM Electronic bartacker RTC-KE430

Electronic automatic bartacker with direct drive type Brother RTC-KE430 for sewing the bartacks on the cut Texbands.


This Brother RTC-KE430 direct drive electronic bartacking machine is for sewing the bartacks to the cut lift belts. It can be used as a stand-alone machine or directly next to the Texband machine to ensure a continuous and smooth production flow.

With the sewing template for 6, 8 and 10 mm wide Texbands incl. base plate, the Texbands can be sewn easily, safely and quickly. Changing the sewing template takes only a few seconds with the optional quick-change system.

If the Texband Cutter and automatic bartacker are combined at one workstation, a touch panel with integrated PC can be connected to the Texband Cutter as an expandable option. With this PC, different jobs can be stored or read in and quickly retrieved. This increases productivity and efficiency.

Work operations


  • Seam image zig-zag bar lengthwise or crosswise to the tape
  • The respective programmes can be called up directly via the keyboard
  • Fast sewing cycle for high production output
  • Base plate with sewing template for 6, 8 or 10 mm take-up tape with special finger protection
  • Special thread cutter for short thread ends
  • Thread wiper; standard hook; staple lifter
  • Stitch rate maximum 3'200 stitches/minute
  • AC servo motor 550W (direct drive); single-phase 230V
  • LED sewing light integrated
  • Reinforced steel frame, height adjustable
  • Complete with sewing table, foot pedal, steel frame and sewing lamp
  • Machine weight complete 70 kg
  • Special features:
    - larger multilayer table top 110 x 69 cm
    - adapted needle hole
    - includes 3 sewing programmes for 6, 8 and 10 mm (standard)
    - further customised seam programmes on request
  • Options:
    - Quick-change system for sewing clamps (sewing templates for 6, 8 and 10 mm wide textile tapes)

Your benefits

  • Can be combined with any Texband machine
  • Simple operation
  • Extremely low risk of injury due to finger protection
  • High-quality components and workmanship of the machine
  • Fast sewing cycle for high production output
  • Templates for 6, 8 and 10 mm wide Texband guarantees high quality and a clean seam pattern
  • With quick-change system, the inserts can be changed within a few seconds
  • Optional touch panel for Texband Cutter ensures even higher productivity at the combined workstation

Extensible options

Touch panel with integrated PC for Texband Cutter

This optional system is ideal when the automatic bartacker and the Texband Cutter are operated by one person at a combined workstation.

  • Using the large 10-key keypad on the control panel, length and number can be sent directly to the control unit in order to process individual Texbands.
  • Data (daily production) can be read in from the network or USB stick via the list in order to process them one by one.
  • Within the list, the orders can be selected as desired.
  • Orders are automatically marked green and locked after each processing.
  • When the order has been processed, it automatically jumps down one order.
  • Red lines (orders) are not yet processed; blue line (order) = active processing
  • Length and number of orders can be adjusted via "edit".
  • Panel PC with resistive touch-screen; screen size 12.1" SVGA (24 x 18 cm)
  • 1.6 GB CPU; 2GB DDR3 memory; 64GB 2.5" SATA Flash Disk; Windows7 Embedded
  • Fanless HMI barebone; Aluminium Chasis; RJ45 and USB-2 connection
Jentschmann AG Schweiz

Feldstrasse 2
CH-8194 Hüntwangen
Telefon +41 44 735 83 83
Fax +41 44 735 83 84
This email address is being protected from spambots. You need JavaScript enabled to view it.

Jentschmann North America

66 Cambridge Cr.
Bradford, Ontario
L3Z 1E3 Canada
Dietmar Jeske
Phone +1 416 716 6117
This email address is being protected from spambots. You need JavaScript enabled to view it.